• Roofing Contractor
  • Siding
  • Masonry
  • Solar
  • About Us
  • Financing
  • Referrals
  • Contact Us
  • Get a free estimate
    Book a service call

    Metal Decking

    In January 2014 we decided to grow our business in an area that fit in with roofing. Metal Decking was an easy fit as it is the substrate of most roofing systems. Procedures to install Metal Decking are welding and crimping to joists and beams / Hilti Pin and screws to joist and beams / Tek 5 screws to joist, beams and c-channels.

    Metal decking is most commonly fastened to supporting steel members by our CWB Certified Welders or powder actuated pins operated by trained personnel. Side laps for metal deck are fastened with screws or mechanically crimped.

    Our crews install the metal deck using approved field installation drawings that incorporate project requirements such as Steel Deck Institute (SDI-www.sdi.org) requirements and Engineer-of-Record approvals.

    Metal Cladding is another type of roofing that we can install; at this time we use mostly Vicwest Products as our local manufacturer. Products include Prestige Series, CL 7040

    We also install Metal Cladding, Phenolic Panels, Cementitious Panels, Aluminum Panels and Insulated Wall Panels.

    exterior siding ideasMetal Cladding is an inexpensive way of roofing your building with an up graded Architectural look.

    Phenolic Panels including Prodema, Trespa and Abet Laminate are easy to work with and give a more linear look. These are made out of, or consisting of, a core made with resin and high-density, thermosetting cellulose fibres. Over this compact core, different materials of various finishes are used, including laminates, wood panels, etc.

    Aluminum Panels are usually 4mm material with a poly core center and engineered Aluminum extrusions. They are attached to the building with aluminum clips spaced to ensure proper engineering for the proper size Panel. IMP (Insulated Metal Panels) 26 gauge outside and inside metal pieces with an expandable foam injected into it at time of production. IMP comes in different thicknesses from 2” to 8”.


    As one of the larger roofing companies in Edmonton, we can deal with all commercial roofing and exteriors projects through our commercial division and residential roofing and exterior requirements through our residential division. Our main number for all your enquiries is 780.438.0331 or simply send us an email.

    We are fully insured and carry full up-to-date Workers’ Compensation Board coverage (WCB) for all of our experienced roofing technicians. You will receive a full workmanship warranty on your roofing system, giving you complete peace of mind. Our testimonials page features reviews from just a few of our satisfied customers and we are featured on the Better Business Bureau with an A+ rating.